+ add existing config

1 files changed, 570 insertions, 0 deletions

diff --git a/dot_spacemacs b/dot_spacemacs
new file mode 100644
index 0000000..0efe7db
--- /dev/null
+++ b/dot_spacemacs
@@ -0,0 +1,570 @@
+;; -*- mode: emacs-lisp; lexical-binding: t -*-
+;; This file is loaded by Spacemacs at startup.
+;; It must be stored in your home directory.
+
+(defun dotspacemacs/layers ()
+  "Layer configuration:
+This function should only modify configuration layer settings."
+  (setq-default
+   ;; Base distribution to use. This is a layer contained in the directory
+   ;; `+distribution'. For now available distributions are `spacemacs-base'
+   ;; or `spacemacs'. (default 'spacemacs)
+   dotspacemacs-distribution 'spacemacs
+
+   ;; Lazy installation of layers (i.e. layers are installed only when a file
+   ;; with a supported type is opened). Possible values are `all', `unused'
+   ;; and `nil'. `unused' will lazy install only unused layers (i.e. layers
+   ;; not listed in variable `dotspacemacs-configuration-layers'), `all' will
+   ;; lazy install any layer that support lazy installation even the layers
+   ;; listed in `dotspacemacs-configuration-layers'. `nil' disable the lazy
+   ;; installation feature and you have to explicitly list a layer in the
+   ;; variable `dotspacemacs-configuration-layers' to install it.
+   ;; (default 'unused)
+   dotspacemacs-enable-lazy-installation 'unused
+
+   ;; If non-nil then Spacemacs will ask for confirmation before installing
+   ;; a layer lazily. (default t)
+   dotspacemacs-ask-for-lazy-installation t
+
+   ;; List of additional paths where to look for configuration layers.
+   ;; Paths must have a trailing slash (i.e. `~/.mycontribs/')
+   dotspacemacs-configuration-layer-path '()
+
+   ;; List of configuration layers to load.
+   dotspacemacs-configuration-layers
+   '(
+     ;; ----------------------------------------------------------------
+     ;; Example of useful layers you may want to use right away.
+     ;; Uncomment some layer names and press `SPC f e R' (Vim style) or
+     ;; `M-m f e R' (Emacs style) to install them.
+     ;; ----------------------------------------------------------------
+     ;; auto-completion
+     ;; better-defaults
+     emacs-lisp
+     ;; git
+     helm
+     ;; lsp
+     ;; markdown
+     multiple-cursors
+     ;; org
+     ;; (shell :variables
+     ;;        shell-default-height 30
+     ;;        shell-default-position 'bottom)
+     ;; spell-checking
+     ;; syntax-checking
+     ;; version-control
+     treemacs)
+
+
+   ;; List of additional packages that will be installed without being wrapped
+   ;; in a layer (generally the packages are installed only and should still be
+   ;; loaded using load/require/use-package in the user-config section below in
+   ;; this file). If you need some configuration for these packages, then
+   ;; consider creating a layer. You can also put the configuration in
+   ;; `dotspacemacs/user-config'. To use a local version of a package, use the
+   ;; `:location' property: '(your-package :location "~/path/to/your-package/")
+   ;; Also include the dependencies as they will not be resolved automatically.
+   dotspacemacs-additional-packages '()
+
+   ;; A list of packages that cannot be updated.
+   dotspacemacs-frozen-packages '()
+
+   ;; A list of packages that will not be installed and loaded.
+   dotspacemacs-excluded-packages '()
+
+   ;; Defines the behaviour of Spacemacs when installing packages.
+   ;; Possible values are `used-only', `used-but-keep-unused' and `all'.
+   ;; `used-only' installs only explicitly used packages and deletes any unused
+   ;; packages as well as their unused dependencies. `used-but-keep-unused'
+   ;; installs only the used packages but won't delete unused ones. `all'
+   ;; installs *all* packages supported by Spacemacs and never uninstalls them.
+   ;; (default is `used-only')
+   dotspacemacs-install-packages 'used-only))
+
+(defun dotspacemacs/init ()
+  "Initialization:
+This function is called at the very beginning of Spacemacs startup,
+before layer configuration.
+It should only modify the values of Spacemacs settings."
+  ;; This setq-default sexp is an exhaustive list of all the supported
+  ;; spacemacs settings.
+  (setq-default
+   ;; If non-nil then enable support for the portable dumper. You'll need to
+   ;; compile Emacs 27 from source following the instructions in file
+   ;; EXPERIMENTAL.org at to root of the git repository.
+   ;;
+   ;; WARNING: pdumper does not work with Native Compilation, so it's disabled
+   ;; regardless of the following setting when native compilation is in effect.
+   ;;
+   ;; (default nil)
+   dotspacemacs-enable-emacs-pdumper nil
+
+   ;; Name of executable file pointing to emacs 27+. This executable must be
+   ;; in your PATH.
+   ;; (default "emacs")
+   dotspacemacs-emacs-pdumper-executable-file "emacs"
+
+   ;; Name of the Spacemacs dump file. This is the file will be created by the
+   ;; portable dumper in the cache directory under dumps sub-directory.
+   ;; To load it when starting Emacs add the parameter `--dump-file'
+   ;; when invoking Emacs 27.1 executable on the command line, for instance:
+   ;;   ./emacs --dump-file=$HOME/.emacs.d/.cache/dumps/spacemacs-27.1.pdmp
+   ;; (default (format "spacemacs-%s.pdmp" emacs-version))
+   dotspacemacs-emacs-dumper-dump-file (format "spacemacs-%s.pdmp" emacs-version)
+
+   ;; If non-nil ELPA repositories are contacted via HTTPS whenever it's
+   ;; possible. Set it to nil if you have no way to use HTTPS in your
+   ;; environment, otherwise it is strongly recommended to let it set to t.
+   ;; This variable has no effect if Emacs is launched with the parameter
+   ;; `--insecure' which forces the value of this variable to nil.
+   ;; (default t)
+   dotspacemacs-elpa-https t
+
+   ;; Maximum allowed time in seconds to contact an ELPA repository.
+   ;; (default 5)
+   dotspacemacs-elpa-timeout 5
+
+   ;; Set `gc-cons-threshold' and `gc-cons-percentage' when startup finishes.
+   ;; This is an advanced option and should not be changed unless you suspect
+   ;; performance issues due to garbage collection operations.
+   ;; (default '(100000000 0.1))
+   dotspacemacs-gc-cons '(100000000 0.1)
+
+   ;; Set `read-process-output-max' when startup finishes.
+   ;; This defines how much data is read from a foreign process.
+   ;; Setting this >= 1 MB should increase performance for lsp servers
+   ;; in emacs 27.
+   ;; (default (* 1024 1024))
+   dotspacemacs-read-process-output-max (* 1024 1024)
+
+   ;; If non-nil then Spacelpa repository is the primary source to install
+   ;; a locked version of packages. If nil then Spacemacs will install the
+   ;; latest version of packages from MELPA. Spacelpa is currently in
+   ;; experimental state please use only for testing purposes.
+   ;; (default nil)
+   dotspacemacs-use-spacelpa nil
+
+   ;; If non-nil then verify the signature for downloaded Spacelpa archives.
+   ;; (default t)
+   dotspacemacs-verify-spacelpa-archives t
+
+   ;; If non-nil then spacemacs will check for updates at startup
+   ;; when the current branch is not `develop'. Note that checking for
+   ;; new versions works via git commands, thus it calls GitHub services
+   ;; whenever you start Emacs. (default nil)
+   dotspacemacs-check-for-update nil
+
+   ;; If non-nil, a form that evaluates to a package directory. For example, to
+   ;; use different package directories for different Emacs versions, set this
+   ;; to `emacs-version'. (default 'emacs-version)
+   dotspacemacs-elpa-subdirectory 'emacs-version
+
+   ;; One of `vim', `emacs' or `hybrid'.
+   ;; `hybrid' is like `vim' except that `insert state' is replaced by the
+   ;; `hybrid state' with `emacs' key bindings. The value can also be a list
+   ;; with `:variables' keyword (similar to layers). Check the editing styles
+   ;; section of the documentation for details on available variables.
+   ;; (default 'vim)
+   dotspacemacs-editing-style 'vim
+
+   ;; If non-nil show the version string in the Spacemacs buffer. It will
+   ;; appear as (spacemacs version)@(emacs version)
+   ;; (default t)
+   dotspacemacs-startup-buffer-show-version t
+
+   ;; Specify the startup banner. Default value is `official', it displays
+   ;; the official spacemacs logo. An integer value is the index of text
+   ;; banner, `random' chooses a random text banner in `core/banners'
+   ;; directory. A string value must be a path to an image format supported
+   ;; by your Emacs build.
+   ;; If the value is nil then no banner is displayed. (default 'official)
+   dotspacemacs-startup-banner 'official
+
+   ;; Scale factor controls the scaling (size) of the startup banner. Default
+   ;; value is `auto' for scaling the logo automatically to fit all buffer
+   ;; contents, to a maximum of the full image height and a minimum of 3 line
+   ;; heights. If set to a number (int or float) it is used as a constant
+   ;; scaling factor for the default logo size.
+   dotspacemacs-startup-banner-scale 'auto
+
+   ;; List of items to show in startup buffer or an association list of
+   ;; the form `(list-type . list-size)`. If nil then it is disabled.
+   ;; Possible values for list-type are:
+   ;; `recents' `recents-by-project' `bookmarks' `projects' `agenda' `todos'.
+   ;; List sizes may be nil, in which case
+   ;; `spacemacs-buffer-startup-lists-length' takes effect.
+   ;; The exceptional case is `recents-by-project', where list-type must be a
+   ;; pair of numbers, e.g. `(recents-by-project . (7 .  5))', where the first
+   ;; number is the project limit and the second the limit on the recent files
+   ;; within a project.
+   dotspacemacs-startup-lists '((recents . 5)
+                                (projects . 7))
+
+   ;; True if the home buffer should respond to resize events. (default t)
+   dotspacemacs-startup-buffer-responsive t
+
+   ;; Show numbers before the startup list lines. (default t)
+   dotspacemacs-show-startup-list-numbers t
+
+   ;; The minimum delay in seconds between number key presses. (default 0.4)
+   dotspacemacs-startup-buffer-multi-digit-delay 0.4
+
+   ;; If non-nil, show file icons for entries and headings on Spacemacs home buffer.
+   ;; This has no effect in terminal or if "all-the-icons" package or the font
+   ;; is not installed. (default nil)
+   dotspacemacs-startup-buffer-show-icons nil
+
+   ;; Default major mode for a new empty buffer. Possible values are mode
+   ;; names such as `text-mode'; and `nil' to use Fundamental mode.
+   ;; (default `text-mode')
+   dotspacemacs-new-empty-buffer-major-mode 'text-mode
+
+   ;; Default major mode of the scratch buffer (default `text-mode')
+   dotspacemacs-scratch-mode 'text-mode
+
+   ;; If non-nil, *scratch* buffer will be persistent. Things you write down in
+   ;; *scratch* buffer will be saved and restored automatically.
+   dotspacemacs-scratch-buffer-persistent nil
+
+   ;; If non-nil, `kill-buffer' on *scratch* buffer
+   ;; will bury it instead of killing.
+   dotspacemacs-scratch-buffer-unkillable nil
+
+   ;; Initial message in the scratch buffer, such as "Welcome to Spacemacs!"
+   ;; (default nil)
+   dotspacemacs-initial-scratch-message nil
+
+   ;; List of themes, the first of the list is loaded when spacemacs starts.
+   ;; Press `SPC T n' to cycle to the next theme in the list (works great
+   ;; with 2 themes variants, one dark and one light)
+   dotspacemacs-themes '(spacemacs-dark
+                         spacemacs-light)
+
+   ;; Set the theme for the Spaceline. Supported themes are `spacemacs',
+   ;; `all-the-icons', `custom', `doom', `vim-powerline' and `vanilla'. The
+   ;; first three are spaceline themes. `doom' is the doom-emacs mode-line.
+   ;; `vanilla' is default Emacs mode-line. `custom' is a user defined themes,
+   ;; refer to the DOCUMENTATION.org for more info on how to create your own
+   ;; spaceline theme. Value can be a symbol or list with additional properties.
+   ;; (default '(spacemacs :separator wave :separator-scale 1.5))
+   dotspacemacs-mode-line-theme '(spacemacs :separator wave :separator-scale 1.5)
+
+   ;; If non-nil the cursor color matches the state color in GUI Emacs.
+   ;; (default t)
+   dotspacemacs-colorize-cursor-according-to-state t
+
+   ;; Default font or prioritized list of fonts. The `:size' can be specified as
+   ;; a non-negative integer (pixel size), or a floating-point (point size).
+   ;; Point size is recommended, because it's device independent. (default 10.0)
+   dotspacemacs-default-font '("Source Code Pro"
+                               :size 10.0
+                               :weight normal
+                               :width normal)
+
+   ;; The leader key (default "SPC")
+   dotspacemacs-leader-key "SPC"
+
+   ;; The key used for Emacs commands `M-x' (after pressing on the leader key).
+   ;; (default "SPC")
+   dotspacemacs-emacs-command-key "SPC"
+
+   ;; The key used for Vim Ex commands (default ":")
+   dotspacemacs-ex-command-key ":"
+
+   ;; The leader key accessible in `emacs state' and `insert state'
+   ;; (default "M-m")
+   dotspacemacs-emacs-leader-key "M-m"
+
+   ;; Major mode leader key is a shortcut key which is the equivalent of
+   ;; pressing `<leader> m`. Set it to `nil` to disable it. (default ",")
+   dotspacemacs-major-mode-leader-key ","
+
+   ;; Major mode leader key accessible in `emacs state' and `insert state'.
+   ;; (default "C-M-m" for terminal mode, "<M-return>" for GUI mode).
+   ;; Thus M-RET should work as leader key in both GUI and terminal modes.
+   ;; C-M-m also should work in terminal mode, but not in GUI mode.
+   dotspacemacs-major-mode-emacs-leader-key (if window-system "<M-return>" "C-M-m")
+
+   ;; These variables control whether separate commands are bound in the GUI to
+   ;; the key pairs `C-i', `TAB' and `C-m', `RET'.
+   ;; Setting it to a non-nil value, allows for separate commands under `C-i'
+   ;; and TAB or `C-m' and `RET'.
+   ;; In the terminal, these pairs are generally indistinguishable, so this only
+   ;; works in the GUI. (default nil)
+   dotspacemacs-distinguish-gui-tab nil
+
+   ;; Name of the default layout (default "Default")
+   dotspacemacs-default-layout-name "Default"
+
+   ;; If non-nil the default layout name is displayed in the mode-line.
+   ;; (default nil)
+   dotspacemacs-display-default-layout nil
+
+   ;; If non-nil then the last auto saved layouts are resumed automatically upon
+   ;; start. (default nil)
+   dotspacemacs-auto-resume-layouts nil
+
+   ;; If non-nil, auto-generate layout name when creating new layouts. Only has
+   ;; effect when using the "jump to layout by number" commands. (default nil)
+   dotspacemacs-auto-generate-layout-names nil
+
+   ;; Size (in MB) above which spacemacs will prompt to open the large file
+   ;; literally to avoid performance issues. Opening a file literally means that
+   ;; no major mode or minor modes are active. (default is 1)
+   dotspacemacs-large-file-size 1
+
+   ;; Location where to auto-save files. Possible values are `original' to
+   ;; auto-save the file in-place, `cache' to auto-save the file to another
+   ;; file stored in the cache directory and `nil' to disable auto-saving.
+   ;; (default 'cache)
+   dotspacemacs-auto-save-file-location 'cache
+
+   ;; Maximum number of rollback slots to keep in the cache. (default 5)
+   dotspacemacs-max-rollback-slots 5
+
+   ;; If non-nil, the paste transient-state is enabled. While enabled, after you
+   ;; paste something, pressing `C-j' and `C-k' several times cycles through the
+   ;; elements in the `kill-ring'. (default nil)
+   dotspacemacs-enable-paste-transient-state nil
+
+   ;; Which-key delay in seconds. The which-key buffer is the popup listing
+   ;; the commands bound to the current keystroke sequence. (default 0.4)
+   dotspacemacs-which-key-delay 0.4
+
+   ;; Which-key frame position. Possible values are `right', `bottom' and
+   ;; `right-then-bottom'. right-then-bottom tries to display the frame to the
+   ;; right; if there is insufficient space it displays it at the bottom.
+   ;; (default 'bottom)
+   dotspacemacs-which-key-position 'bottom
+
+   ;; Control where `switch-to-buffer' displays the buffer. If nil,
+   ;; `switch-to-buffer' displays the buffer in the current window even if
+   ;; another same-purpose window is available. If non-nil, `switch-to-buffer'
+   ;; displays the buffer in a same-purpose window even if the buffer can be
+   ;; displayed in the current window. (default nil)
+   dotspacemacs-switch-to-buffer-prefers-purpose nil
+
+   ;; If non-nil a progress bar is displayed when spacemacs is loading. This
+   ;; may increase the boot time on some systems and emacs builds, set it to
+   ;; nil to boost the loading time. (default t)
+   dotspacemacs-loading-progress-bar t
+
+   ;; If non-nil the frame is fullscreen when Emacs starts up. (default nil)
+   ;; (Emacs 24.4+ only)
+   dotspacemacs-fullscreen-at-startup nil
+
+   ;; If non-nil `spacemacs/toggle-fullscreen' will not use native fullscreen.
+   ;; Use to disable fullscreen animations in OSX. (default nil)
+   dotspacemacs-fullscreen-use-non-native nil
+
+   ;; If non-nil the frame is maximized when Emacs starts up.
+   ;; Takes effect only if `dotspacemacs-fullscreen-at-startup' is nil.
+   ;; (default nil) (Emacs 24.4+ only)
+   dotspacemacs-maximized-at-startup nil
+
+   ;; If non-nil the frame is undecorated when Emacs starts up. Combine this
+   ;; variable with `dotspacemacs-maximized-at-startup' in OSX to obtain
+   ;; borderless fullscreen. (default nil)
+   dotspacemacs-undecorated-at-startup nil
+
+   ;; A value from the range (0..100), in increasing opacity, which describes
+   ;; the transparency level of a frame when it's active or selected.
+   ;; Transparency can be toggled through `toggle-transparency'. (default 90)
+   dotspacemacs-active-transparency 90
+
+   ;; A value from the range (0..100), in increasing opacity, which describes
+   ;; the transparency level of a frame when it's inactive or deselected.
+   ;; Transparency can be toggled through `toggle-transparency'. (default 90)
+   dotspacemacs-inactive-transparency 90
+
+   ;; If non-nil show the titles of transient states. (default t)
+   dotspacemacs-show-transient-state-title t
+
+   ;; If non-nil show the color guide hint for transient state keys. (default t)
+   dotspacemacs-show-transient-state-color-guide t
+
+   ;; If non-nil unicode symbols are displayed in the mode line.
+   ;; If you use Emacs as a daemon and wants unicode characters only in GUI set
+   ;; the value to quoted `display-graphic-p'. (default t)
+   dotspacemacs-mode-line-unicode-symbols t
+
+   ;; If non-nil smooth scrolling (native-scrolling) is enabled. Smooth
+   ;; scrolling overrides the default behavior of Emacs which recenters point
+   ;; when it reaches the top or bottom of the screen. (default t)
+   dotspacemacs-smooth-scrolling t
+
+   ;; Show the scroll bar while scrolling. The auto hide time can be configured
+   ;; by setting this variable to a number. (default t)
+   dotspacemacs-scroll-bar-while-scrolling t
+
+   ;; Control line numbers activation.
+   ;; If set to `t', `relative' or `visual' then line numbers are enabled in all
+   ;; `prog-mode' and `text-mode' derivatives. If set to `relative', line
+   ;; numbers are relative. If set to `visual', line numbers are also relative,
+   ;; but only visual lines are counted. For example, folded lines will not be
+   ;; counted and wrapped lines are counted as multiple lines.
+   ;; This variable can also be set to a property list for finer control:
+   ;; '(:relative nil
+   ;;   :visual nil
+   ;;   :disabled-for-modes dired-mode
+   ;;                       doc-view-mode
+   ;;                       markdown-mode
+   ;;                       org-mode
+   ;;                       pdf-view-mode
+   ;;                       text-mode
+   ;;   :size-limit-kb 1000)
+   ;; When used in a plist, `visual' takes precedence over `relative'.
+   ;; (default nil)
+   dotspacemacs-line-numbers nil
+
+   ;; Code folding method. Possible values are `evil', `origami' and `vimish'.
+   ;; (default 'evil)
+   dotspacemacs-folding-method 'evil
+
+   ;; If non-nil and `dotspacemacs-activate-smartparens-mode' is also non-nil,
+   ;; `smartparens-strict-mode' will be enabled in programming modes.
+   ;; (default nil)
+   dotspacemacs-smartparens-strict-mode nil
+
+   ;; If non-nil smartparens-mode will be enabled in programming modes.
+   ;; (default t)
+   dotspacemacs-activate-smartparens-mode t
+
+   ;; If non-nil pressing the closing parenthesis `)' key in insert mode passes
+   ;; over any automatically added closing parenthesis, bracket, quote, etc...
+   ;; This can be temporary disabled by pressing `C-q' before `)'. (default nil)
+   dotspacemacs-smart-closing-parenthesis nil
+
+   ;; Select a scope to highlight delimiters. Possible values are `any',
+   ;; `current', `all' or `nil'. Default is `all' (highlight any scope and
+   ;; emphasis the current one). (default 'all)
+   dotspacemacs-highlight-delimiters 'all
+
+   ;; If non-nil, start an Emacs server if one is not already running.
+   ;; (default nil)
+   dotspacemacs-enable-server nil
+
+   ;; Set the emacs server socket location.
+   ;; If nil, uses whatever the Emacs default is, otherwise a directory path
+   ;; like \"~/.emacs.d/server\". It has no effect if
+   ;; `dotspacemacs-enable-server' is nil.
+   ;; (default nil)
+   dotspacemacs-server-socket-dir nil
+
+   ;; If non-nil, advise quit functions to keep server open when quitting.
+   ;; (default nil)
+   dotspacemacs-persistent-server nil
+
+   ;; List of search tool executable names. Spacemacs uses the first installed
+   ;; tool of the list. Supported tools are `rg', `ag', `pt', `ack' and `grep'.
+   ;; (default '("rg" "ag" "pt" "ack" "grep"))
+   dotspacemacs-search-tools '("rg" "ag" "pt" "ack" "grep")
+
+   ;; Format specification for setting the frame title.
+   ;; %a - the `abbreviated-file-name', or `buffer-name'
+   ;; %t - `projectile-project-name'
+   ;; %I - `invocation-name'
+   ;; %S - `system-name'
+   ;; %U - contents of $USER
+   ;; %b - buffer name
+   ;; %f - visited file name
+   ;; %F - frame name
+   ;; %s - process status
+   ;; %p - percent of buffer above top of window, or Top, Bot or All
+   ;; %P - percent of buffer above bottom of window, perhaps plus Top, or Bot or All
+   ;; %m - mode name
+   ;; %n - Narrow if appropriate
+   ;; %z - mnemonics of buffer, terminal, and keyboard coding systems
+   ;; %Z - like %z, but including the end-of-line format
+   ;; If nil then Spacemacs uses default `frame-title-format' to avoid
+   ;; performance issues, instead of calculating the frame title by
+   ;; `spacemacs/title-prepare' all the time.
+   ;; (default "%I@%S")
+   dotspacemacs-frame-title-format "%I@%S"
+
+   ;; Format specification for setting the icon title format
+   ;; (default nil - same as frame-title-format)
+   dotspacemacs-icon-title-format nil
+
+   ;; Color highlight trailing whitespace in all prog-mode and text-mode derived
+   ;; modes such as c++-mode, python-mode, emacs-lisp, html-mode, rst-mode etc.
+   ;; (default t)
+   dotspacemacs-show-trailing-whitespace t
+
+   ;; Delete whitespace while saving buffer. Possible values are `all'
+   ;; to aggressively delete empty line and long sequences of whitespace,
+   ;; `trailing' to delete only the whitespace at end of lines, `changed' to
+   ;; delete only whitespace for changed lines or `nil' to disable cleanup.
+   ;; (default nil)
+   dotspacemacs-whitespace-cleanup nil
+
+   ;; If non-nil activate `clean-aindent-mode' which tries to correct
+   ;; virtual indentation of simple modes. This can interfere with mode specific
+   ;; indent handling like has been reported for `go-mode'.
+   ;; If it does deactivate it here.
+   ;; (default t)
+   dotspacemacs-use-clean-aindent-mode t
+
+   ;; Accept SPC as y for prompts if non-nil. (default nil)
+   dotspacemacs-use-SPC-as-y nil
+
+   ;; If non-nil shift your number row to match the entered keyboard layout
+   ;; (only in insert state). Currently supported keyboard layouts are:
+   ;; `qwerty-us', `qwertz-de' and `querty-ca-fr'.
+   ;; New layouts can be added in `spacemacs-editing' layer.
+   ;; (default nil)
+   dotspacemacs-swap-number-row nil
+
+   ;; Either nil or a number of seconds. If non-nil zone out after the specified
+   ;; number of seconds. (default nil)
+   dotspacemacs-zone-out-when-idle nil
+
+   ;; Run `spacemacs/prettify-org-buffer' when
+   ;; visiting README.org files of Spacemacs.
+   ;; (default nil)
+   dotspacemacs-pretty-docs nil
+
+   ;; If nil the home buffer shows the full path of agenda items
+   ;; and todos. If non-nil only the file name is shown.
+   dotspacemacs-home-shorten-agenda-source nil
+
+   ;; If non-nil then byte-compile some of Spacemacs files.
+   dotspacemacs-byte-compile nil))
+
+(defun dotspacemacs/user-env ()
+  "Environment variables setup.
+This function defines the environment variables for your Emacs session. By
+default it calls `spacemacs/load-spacemacs-env' which loads the environment
+variables declared in `~/.spacemacs.env' or `~/.spacemacs.d/.spacemacs.env'.
+See the header of this file for more information."
+  (spacemacs/load-spacemacs-env)
+)
+
+(defun dotspacemacs/user-init ()
+  "Initialization for user code:
+This function is called immediately after `dotspacemacs/init', before layer
+configuration.
+It is mostly for variables that should be set before packages are loaded.
+If you are unsure, try setting them in `dotspacemacs/user-config' first."
+)
+
+
+(defun dotspacemacs/user-load ()
+  "Library to load while dumping.
+This function is called only while dumping Spacemacs configuration. You can
+`require' or `load' the libraries of your choice that will be included in the
+dump."
+)
+
+
+(defun dotspacemacs/user-config ()
+  "Configuration for user code:
+This function is called at the very end of Spacemacs startup, after layer
+configuration.
+Put your configuration code here, except for variables that should be set
+before packages are loaded."
+)
+
+
+;; Do not write anything past this comment. This is where Emacs will
+;; auto-generate custom variable definitions.