4 files changed, 582 insertions, 9 deletions

diff --git a/docs/Makefile b/docs/Makefile
new file mode 100644
index 0000000..fae2b97
--- /dev/null
+++ b/docs/Makefile
@@ -0,0 +1,225 @@
+# Makefile for Sphinx documentation
+#
+
+# You can set these variables from the command line.
+SPHINXOPTS    =
+SPHINXBUILD   = sphinx-build
+PAPER         =
+BUILDDIR      = _build
+
+# Internal variables.
+PAPEROPT_a4     = -D latex_paper_size=a4
+PAPEROPT_letter = -D latex_paper_size=letter
+ALLSPHINXOPTS   = -d $(BUILDDIR)/doctrees $(PAPEROPT_$(PAPER)) $(SPHINXOPTS) .
+# the i18n builder cannot share the environment and doctrees with the others
+I18NSPHINXOPTS  = $(PAPEROPT_$(PAPER)) $(SPHINXOPTS) .
+
+.PHONY: help
+help:
+        @echo "Please use \`make <target>' where <target> is one of"
+        @echo "  html       to make standalone HTML files"
+        @echo "  dirhtml    to make HTML files named index.html in directories"
+        @echo "  singlehtml to make a single large HTML file"
+        @echo "  pickle     to make pickle files"
+        @echo "  json       to make JSON files"
+        @echo "  htmlhelp   to make HTML files and a HTML help project"
+        @echo "  qthelp     to make HTML files and a qthelp project"
+        @echo "  applehelp  to make an Apple Help Book"
+        @echo "  devhelp    to make HTML files and a Devhelp project"
+        @echo "  epub       to make an epub"
+        @echo "  epub3      to make an epub3"
+        @echo "  latex      to make LaTeX files, you can set PAPER=a4 or PAPER=letter"
+        @echo "  latexpdf   to make LaTeX files and run them through pdflatex"
+        @echo "  latexpdfja to make LaTeX files and run them through platex/dvipdfmx"
+        @echo "  text       to make text files"
+        @echo "  man        to make manual pages"
+        @echo "  texinfo    to make Texinfo files"
+        @echo "  info       to make Texinfo files and run them through makeinfo"
+        @echo "  gettext    to make PO message catalogs"
+        @echo "  changes    to make an overview of all changed/added/deprecated items"
+        @echo "  xml        to make Docutils-native XML files"
+        @echo "  pseudoxml  to make pseudoxml-XML files for display purposes"
+        @echo "  linkcheck  to check all external links for integrity"
+        @echo "  doctest    to run all doctests embedded in the documentation (if enabled)"
+        @echo "  coverage   to run coverage check of the documentation (if enabled)"
+        @echo "  dummy      to check syntax errors of document sources"
+
+.PHONY: clean
+clean:
+        rm -rf $(BUILDDIR)/*
+
+.PHONY: html
+html:
+        $(SPHINXBUILD) -b html $(ALLSPHINXOPTS) $(BUILDDIR)/html
+        @echo
+        @echo "Build finished. The HTML pages are in $(BUILDDIR)/html."
+
+.PHONY: dirhtml
+dirhtml:
+        $(SPHINXBUILD) -b dirhtml $(ALLSPHINXOPTS) $(BUILDDIR)/dirhtml
+        @echo
+        @echo "Build finished. The HTML pages are in $(BUILDDIR)/dirhtml."
+
+.PHONY: singlehtml
+singlehtml:
+        $(SPHINXBUILD) -b singlehtml $(ALLSPHINXOPTS) $(BUILDDIR)/singlehtml
+        @echo
+        @echo "Build finished. The HTML page is in $(BUILDDIR)/singlehtml."
+
+.PHONY: pickle
+pickle:
+        $(SPHINXBUILD) -b pickle $(ALLSPHINXOPTS) $(BUILDDIR)/pickle
+        @echo
+        @echo "Build finished; now you can process the pickle files."
+
+.PHONY: json
+json:
+        $(SPHINXBUILD) -b json $(ALLSPHINXOPTS) $(BUILDDIR)/json
+        @echo
+        @echo "Build finished; now you can process the JSON files."
+
+.PHONY: htmlhelp
+htmlhelp:
+        $(SPHINXBUILD) -b htmlhelp $(ALLSPHINXOPTS) $(BUILDDIR)/htmlhelp
+        @echo
+        @echo "Build finished; now you can run HTML Help Workshop with the" \
+              ".hhp project file in $(BUILDDIR)/htmlhelp."
+
+.PHONY: qthelp
+qthelp:
+        $(SPHINXBUILD) -b qthelp $(ALLSPHINXOPTS) $(BUILDDIR)/qthelp
+        @echo
+        @echo "Build finished; now you can run "qcollectiongenerator" with the" \
+              ".qhcp project file in $(BUILDDIR)/qthelp, like this:"
+        @echo "# qcollectiongenerator $(BUILDDIR)/qthelp/Mastodonpy.qhcp"
+        @echo "To view the help file:"
+        @echo "# assistant -collectionFile $(BUILDDIR)/qthelp/Mastodonpy.qhc"
+
+.PHONY: applehelp
+applehelp:
+        $(SPHINXBUILD) -b applehelp $(ALLSPHINXOPTS) $(BUILDDIR)/applehelp
+        @echo
+        @echo "Build finished. The help book is in $(BUILDDIR)/applehelp."
+        @echo "N.B. You won't be able to view it unless you put it in" \
+              "~/Library/Documentation/Help or install it in your application" \
+              "bundle."
+
+.PHONY: devhelp
+devhelp:
+        $(SPHINXBUILD) -b devhelp $(ALLSPHINXOPTS) $(BUILDDIR)/devhelp
+        @echo
+        @echo "Build finished."
+        @echo "To view the help file:"
+        @echo "# mkdir -p $$HOME/.local/share/devhelp/Mastodonpy"
+        @echo "# ln -s $(BUILDDIR)/devhelp $$HOME/.local/share/devhelp/Mastodonpy"
+        @echo "# devhelp"
+
+.PHONY: epub
+epub:
+        $(SPHINXBUILD) -b epub $(ALLSPHINXOPTS) $(BUILDDIR)/epub
+        @echo
+        @echo "Build finished. The epub file is in $(BUILDDIR)/epub."
+
+.PHONY: epub3
+epub3:
+        $(SPHINXBUILD) -b epub3 $(ALLSPHINXOPTS) $(BUILDDIR)/epub3
+        @echo
+        @echo "Build finished. The epub3 file is in $(BUILDDIR)/epub3."
+
+.PHONY: latex
+latex:
+        $(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex
+        @echo
+        @echo "Build finished; the LaTeX files are in $(BUILDDIR)/latex."
+        @echo "Run \`make' in that directory to run these through (pdf)latex" \
+              "(use \`make latexpdf' here to do that automatically)."
+
+.PHONY: latexpdf
+latexpdf:
+        $(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex
+        @echo "Running LaTeX files through pdflatex..."
+        $(MAKE) -C $(BUILDDIR)/latex all-pdf
+        @echo "pdflatex finished; the PDF files are in $(BUILDDIR)/latex."
+
+.PHONY: latexpdfja
+latexpdfja:
+        $(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex
+        @echo "Running LaTeX files through platex and dvipdfmx..."
+        $(MAKE) -C $(BUILDDIR)/latex all-pdf-ja
+        @echo "pdflatex finished; the PDF files are in $(BUILDDIR)/latex."
+
+.PHONY: text
+text:
+        $(SPHINXBUILD) -b text $(ALLSPHINXOPTS) $(BUILDDIR)/text
+        @echo
+        @echo "Build finished. The text files are in $(BUILDDIR)/text."
+
+.PHONY: man
+man:
+        $(SPHINXBUILD) -b man $(ALLSPHINXOPTS) $(BUILDDIR)/man
+        @echo
+        @echo "Build finished. The manual pages are in $(BUILDDIR)/man."
+
+.PHONY: texinfo
+texinfo:
+        $(SPHINXBUILD) -b texinfo $(ALLSPHINXOPTS) $(BUILDDIR)/texinfo
+        @echo
+        @echo "Build finished. The Texinfo files are in $(BUILDDIR)/texinfo."
+        @echo "Run \`make' in that directory to run these through makeinfo" \
+              "(use \`make info' here to do that automatically)."
+
+.PHONY: info
+info:
+        $(SPHINXBUILD) -b texinfo $(ALLSPHINXOPTS) $(BUILDDIR)/texinfo
+        @echo "Running Texinfo files through makeinfo..."
+        make -C $(BUILDDIR)/texinfo info
+        @echo "makeinfo finished; the Info files are in $(BUILDDIR)/texinfo."
+
+.PHONY: gettext
+gettext:
+        $(SPHINXBUILD) -b gettext $(I18NSPHINXOPTS) $(BUILDDIR)/locale
+        @echo
+        @echo "Build finished. The message catalogs are in $(BUILDDIR)/locale."
+
+.PHONY: changes
+changes:
+        $(SPHINXBUILD) -b changes $(ALLSPHINXOPTS) $(BUILDDIR)/changes
+        @echo
+        @echo "The overview file is in $(BUILDDIR)/changes."
+
+.PHONY: linkcheck
+linkcheck:
+        $(SPHINXBUILD) -b linkcheck $(ALLSPHINXOPTS) $(BUILDDIR)/linkcheck
+        @echo
+        @echo "Link check complete; look for any errors in the above output " \
+              "or in $(BUILDDIR)/linkcheck/output.txt."
+
+.PHONY: doctest
+doctest:
+        $(SPHINXBUILD) -b doctest $(ALLSPHINXOPTS) $(BUILDDIR)/doctest
+        @echo "Testing of doctests in the sources finished, look at the " \
+              "results in $(BUILDDIR)/doctest/output.txt."
+
+.PHONY: coverage
+coverage:
+        $(SPHINXBUILD) -b coverage $(ALLSPHINXOPTS) $(BUILDDIR)/coverage
+        @echo "Testing of coverage in the sources finished, look at the " \
+              "results in $(BUILDDIR)/coverage/python.txt."
+
+.PHONY: xml
+xml:
+        $(SPHINXBUILD) -b xml $(ALLSPHINXOPTS) $(BUILDDIR)/xml
+        @echo
+        @echo "Build finished. The XML files are in $(BUILDDIR)/xml."
+
+.PHONY: pseudoxml
+pseudoxml:
+        $(SPHINXBUILD) -b pseudoxml $(ALLSPHINXOPTS) $(BUILDDIR)/pseudoxml
+        @echo
+        @echo "Build finished. The pseudo-XML files are in $(BUILDDIR)/pseudoxml."
+
+.PHONY: dummy
+dummy:
+        $(SPHINXBUILD) -b dummy $(ALLSPHINXOPTS) $(BUILDDIR)/dummy
+        @echo
+        @echo "Build finished. Dummy builder generates no files."
diff --git a/docs/conf.py b/docs/conf.py
index 86f9db8..3ccb5ed 100644
--- a/docs/conf.py
+++ b/docs/conf.py
@@ -1,6 +1,346 @@
-import sys
-import os
+# -*- coding: utf-8 -*-
+#
+# Mastodon.py documentation build configuration file, created by
+# sphinx-quickstart on Thu Nov 24 01:25:38 2016.
+#
+# This file is execfile()d with the current directory set to its
+# containing dir.
+#
+# Note that not all possible configuration values are present in this
+# autogenerated file.
+#
+# All configuration values have a default; values that are commented out
+# serve to show the default.
+
+# If extensions (or modules to document with autodoc) are in another directory,
+# add these directories to sys.path here. If the directory is relative to the
+# documentation root, use os.path.abspath to make it absolute, like shown here.
+#
+# import os
+# import sys
+# sys.path.insert(0, os.path.abspath('.'))
+
+# -- General configuration ------------------------------------------------
+
+# If your documentation needs a minimal Sphinx version, state it here.
+#
+# needs_sphinx = '1.0'
 
-extensions = ['sphinx.ext.autodoc']
+import os
+import sys
 sys.path.insert(0, os.path.abspath('../'))
-sys.path.insert(0, os.path.abspath('../../'))
+#print(sys.path)
+
+# Add any Sphinx extension module names here, as strings. They can be
+# extensions coming with Sphinx (named 'sphinx.ext.*') or your custom
+# ones.
+extensions = [
+    'sphinx.ext.autodoc',
+    'sphinx.ext.viewcode',
+]
+
+# Add any paths that contain templates here, relative to this directory.
+templates_path = ['_templates']
+
+# The suffix(es) of source filenames.
+# You can specify multiple suffix as a list of string:
+#
+# source_suffix = ['.rst', '.md']
+source_suffix = '.rst'
+
+# The encoding of source files.
+#
+# source_encoding = 'utf-8-sig'
+
+# The master toctree document.
+master_doc = 'index'
+
+# General information about the project.
+project = u'Mastodon.py'
+copyright = u'2016, Lorenz Diener'
+author = u'Lorenz Diener'
+
+# The version info for the project you're documenting, acts as replacement for
+# |version| and |release|, also used in various other places throughout the
+# built documents.
+#
+# The short X.Y version.
+version = u'0.9'
+# The full version, including alpha/beta/rc tags.
+release = u'0.9'
+
+# The language for content autogenerated by Sphinx. Refer to documentation
+# for a list of supported languages.
+#
+# This is also used if you do content translation via gettext catalogs.
+# Usually you set "language" from the command line for these cases.
+language = None
+
+# There are two options for replacing |today|: either, you set today to some
+# non-false value, then it is used:
+#
+# today = ''
+#
+# Else, today_fmt is used as the format for a strftime call.
+#
+# today_fmt = '%B %d, %Y'
+
+# List of patterns, relative to source directory, that match files and
+# directories to ignore when looking for source files.
+# This patterns also effect to html_static_path and html_extra_path
+exclude_patterns = ['_build', 'Thumbs.db', '.DS_Store']
+
+# The reST default role (used for this markup: `text`) to use for all
+# documents.
+#
+# default_role = None
+
+# If true, '()' will be appended to :func: etc. cross-reference text.
+#
+# add_function_parentheses = True
+
+# If true, the current module name will be prepended to all description
+# unit titles (such as .. function::).
+#
+# add_module_names = True
+
+# If true, sectionauthor and moduleauthor directives will be shown in the
+# output. They are ignored by default.
+#
+# show_authors = False
+
+# The name of the Pygments (syntax highlighting) style to use.
+pygments_style = 'sphinx'
+
+# A list of ignored prefixes for module index sorting.
+# modindex_common_prefix = []
+
+# If true, keep warnings as "system message" paragraphs in the built documents.
+# keep_warnings = False
+
+# If true, `todo` and `todoList` produce output, else they produce nothing.
+todo_include_todos = False
+
+
+# -- Options for HTML output ----------------------------------------------
+
+# The theme to use for HTML and HTML Help pages.  See the documentation for
+# a list of builtin themes.
+#
+html_theme = 'alabaster'
+
+# Theme options are theme-specific and customize the look and feel of a theme
+# further.  For a list of options available for each theme, see the
+# documentation.
+#
+# html_theme_options = {}
+
+# Add any paths that contain custom themes here, relative to this directory.
+# html_theme_path = []
+
+# The name for this set of Sphinx documents.
+# "<project> v<release> documentation" by default.
+#
+# html_title = u'Mastodon.py v0.9'
+
+# A shorter title for the navigation bar.  Default is the same as html_title.
+#
+# html_short_title = None
+
+# The name of an image file (relative to this directory) to place at the top
+# of the sidebar.
+#
+# html_logo = None
+
+# The name of an image file (relative to this directory) to use as a favicon of
+# the docs.  This file should be a Windows icon file (.ico) being 16x16 or 32x32
+# pixels large.
+#
+# html_favicon = None
+
+# Add any paths that contain custom static files (such as style sheets) here,
+# relative to this directory. They are copied after the builtin static files,
+# so a file named "default.css" will overwrite the builtin "default.css".
+html_static_path = ['_static']
+
+# Add any extra paths that contain custom files (such as robots.txt or
+# .htaccess) here, relative to this directory. These files are copied
+# directly to the root of the documentation.
+#
+# html_extra_path = []
+
+# If not None, a 'Last updated on:' timestamp is inserted at every page
+# bottom, using the given strftime format.
+# The empty string is equivalent to '%b %d, %Y'.
+#
+# html_last_updated_fmt = None
+
+# If true, SmartyPants will be used to convert quotes and dashes to
+# typographically correct entities.
+#
+# html_use_smartypants = True
+
+# Custom sidebar templates, maps document names to template names.
+#
+# html_sidebars = {}
+
+# Additional templates that should be rendered to pages, maps page names to
+# template names.
+#
+# html_additional_pages = {}
+
+# If false, no module index is generated.
+#
+# html_domain_indices = True
+
+# If false, no index is generated.
+#
+# html_use_index = True
+
+# If true, the index is split into individual pages for each letter.
+#
+# html_split_index = False
+
+# If true, links to the reST sources are added to the pages.
+#
+# html_show_sourcelink = True
+
+# If true, "Created using Sphinx" is shown in the HTML footer. Default is True.
+#
+# html_show_sphinx = True
+
+# If true, "(C) Copyright ..." is shown in the HTML footer. Default is True.
+#
+# html_show_copyright = True
+
+# If true, an OpenSearch description file will be output, and all pages will
+# contain a <link> tag referring to it.  The value of this option must be the
+# base URL from which the finished HTML is served.
+#
+# html_use_opensearch = ''
+
+# This is the file name suffix for HTML files (e.g. ".xhtml").
+# html_file_suffix = None
+
+# Language to be used for generating the HTML full-text search index.
+# Sphinx supports the following languages:
+#   'da', 'de', 'en', 'es', 'fi', 'fr', 'hu', 'it', 'ja'
+#   'nl', 'no', 'pt', 'ro', 'ru', 'sv', 'tr', 'zh'
+#
+# html_search_language = 'en'
+
+# A dictionary with options for the search language support, empty by default.
+# 'ja' uses this config value.
+# 'zh' user can custom change `jieba` dictionary path.
+#
+# html_search_options = {'type': 'default'}
+
+# The name of a javascript file (relative to the configuration directory) that
+# implements a search results scorer. If empty, the default will be used.
+#
+# html_search_scorer = 'scorer.js'
+
+# Output file base name for HTML help builder.
+htmlhelp_basename = 'Mastodonpydoc'
+
+# -- Options for LaTeX output ---------------------------------------------
+
+latex_elements = {
+     # The paper size ('letterpaper' or 'a4paper').
+     #
+     # 'papersize': 'letterpaper',
+
+     # The font size ('10pt', '11pt' or '12pt').
+     #
+     # 'pointsize': '10pt',
+
+     # Additional stuff for the LaTeX preamble.
+     #
+     # 'preamble': '',
+
+     # Latex figure (float) alignment
+     #
+     # 'figure_align': 'htbp',
+}
+
+# Grouping the document tree into LaTeX files. List of tuples
+# (source start file, target name, title,
+#  author, documentclass [howto, manual, or own class]).
+latex_documents = [
+    (master_doc, 'Mastodonpy.tex', u'Mastodon.py Documentation',
+     u'Lorenz Diener', 'manual'),
+]
+
+# The name of an image file (relative to this directory) to place at the top of
+# the title page.
+#
+# latex_logo = None
+
+# For "manual" documents, if this is true, then toplevel headings are parts,
+# not chapters.
+#
+# latex_use_parts = False
+
+# If true, show page references after internal links.
+#
+# latex_show_pagerefs = False
+
+# If true, show URL addresses after external links.
+#
+# latex_show_urls = False
+
+# Documents to append as an appendix to all manuals.
+#
+# latex_appendices = []
+
+# It false, will not define \strong, \code,     itleref, \crossref ... but only
+# \sphinxstrong, ..., \sphinxtitleref, ... To help avoid clash with user added
+# packages.
+#
+# latex_keep_old_macro_names = True
+
+# If false, no module index is generated.
+#
+# latex_domain_indices = True
+
+
+# -- Options for manual page output ---------------------------------------
+
+# One entry per manual page. List of tuples
+# (source start file, name, description, authors, manual section).
+man_pages = [
+    (master_doc, 'mastodonpy', u'Mastodon.py Documentation',
+     [author], 1)
+]
+
+# If true, show URL addresses after external links.
+#
+# man_show_urls = False
+
+
+# -- Options for Texinfo output -------------------------------------------
+
+# Grouping the document tree into Texinfo files. List of tuples
+# (source start file, target name, title, author,
+#  dir menu entry, description, category)
+texinfo_documents = [
+    (master_doc, 'Mastodonpy', u'Mastodon.py Documentation',
+     author, 'Mastodonpy', 'One line description of project.',
+     'Miscellaneous'),
+]
+
+# Documents to append as an appendix to all manuals.
+#
+# texinfo_appendices = []
+
+# If false, no module index is generated.
+#
+# texinfo_domain_indices = True
+
+# How to display URL addresses: 'footnote', 'no', or 'inline'.
+#
+# texinfo_show_urls = 'footnote'
+
+# If true, do not generate a @detailmenu in the "Top" node's menu.
+#
+# texinfo_no_detailmenu = False
diff --git a/docs/contents.rst b/docs/contents.rst
deleted file mode 100644
index fb1d2ad..0000000
--- a/docs/contents.rst
+++ /dev/null
@@ -1 +0,0 @@
-.. toctree::
diff --git a/docs/index.rst b/docs/index.rst
index 30d8f1e..1334538 100644
--- a/docs/index.rst
+++ b/docs/index.rst
@@ -1,7 +1,16 @@
-Mastodon.py
-===========
+.. Mastodon.py documentation master file, created by
+   sphinx-quickstart on Thu Nov 24 01:25:38 2016.
+   You can adapt this file completely to your liking, but it should at least
+   contain the root `toctree` directive.
 
-Python wrapper for the Mastodon ( https://github.com/Gargron/mastodon/ ) API.
+Welcome to Mastodon.py's documentation!
+=======================================
 
+Contents:
+
+.. toctree::
+   :maxdepth: 2
+
+.. py:currentmodule:: mastodon
 .. autoclass:: Mastodon
-   :members:
\ No newline at end of file
+   :members: