2 files changed, 466 insertions, 0 deletions

diff --git a/dot_config/aerc/aerc.conf b/dot_config/aerc/aerc.conf
new file mode 100644
index 0000000..623d6a2
--- /dev/null
+++ b/dot_config/aerc/aerc.conf
@@ -0,0 +1,344 @@
+#
+# aerc main configuration
+
+[general]
+#
+# If set to "gpg", aerc will use system gpg binary and keystore for all crypto
+# operations. Otherwise, the internal openpgp implementation will be used.
+#
+# Default: internal
+pgp-provider=gpg
+
+# By default, the file permissions of accounts.conf must be restrictive and
+# only allow reading by the file owner (0600). Set this option to true to
+# ignore this permission check. Use this with care as it may expose your
+# credentials.
+#
+# Default: false
+unsafe-accounts-conf=false
+
+[ui]
+#
+# Describes the format for each row in a mailbox view. This field is compatible
+# with mutt's printf-like syntax.
+#
+# Default: %D %-17.17n %Z %s
+index-format=%-20.20D %-17.17n %Z %s
+
+#
+# See time.Time#Format at https://godoc.org/time#Time.Format
+#
+# Default: 2006-01-02 03:04 PM (ISO 8601 + 12 hour time)
+timestamp-format=2006-01-02 03:04 PM
+
+#
+# Index-only time format for messages that were received/sent today.
+# If this is not specified, timestamp-format is used instead.
+#
+# Default: "03:04 PM" (12 hour time)
+this-day-time-format=03:04 PM
+
+#
+# Index-only time format for messages that were received/sent within the last
+# 7 days. If this is not specified, timestamp-format is used instead.
+#
+# Default: "Monday 03:04 PM" (Week day + 12 hour time)
+this-week-time-format=Monday 03:04 PM
+
+#
+# Index-only time format for messages that were received/sent this year.
+# If this is not specified, timestamp-format is used instead.
+#
+# Default: "January 02" (Month + month day)
+this-year-time-format=January 02
+
+#
+# Width of the sidebar, including the border.
+#
+# Default: 20
+sidebar-width=20
+
+#
+# Message to display when viewing an empty folder.
+#
+# Default: (no messages)
+empty-message=(no messages)
+
+# Message to display when no folders exists or are all filtered
+#
+# Default: (no folders)
+empty-dirlist=(no folders)
+
+# Enable mouse events in the ui, e.g. clicking and scrolling with the mousewheel
+#
+# Default: false
+mouse-enabled=true
+
+#
+# Ring the bell when new messages are received
+#
+# Default: true
+new-message-bell=false
+
+# Marker to show before a pinned tab's name.
+#
+# Default: `
+pinned-tab-marker='`'
+
+# Describes the format string to use for the directory list
+#
+# Default: %n %>r
+dirlist-format=%n %>r
+
+# Delay after which the messages are actually listed when entering a directory.
+# This avoids loading messages when skipping over folders and makes the UI more
+# responsive. If you do not want that, set it to 0s.
+#
+# Default: 200ms
+dirlist-delay=200ms
+
+# Display the directory list as a foldable tree that allows to collapse and
+# expand the folders.
+#
+# Default: false
+dirlist-tree=false
+
+# If dirlist-tree is enabled, set level at which folders are collapsed by
+# default. Set to 0 to disable.
+#
+# Default: 0
+dirlist-collapse=0
+
+# List of space-separated criteria to sort the messages by, see *sort*
+# command in *aerc*(1) for reference. Prefixing a criterion with "-r "
+# reverses that criterion.
+#
+# Example: "from -r date"
+#
+# Default: ""
+sort=
+
+# Moves to next message when the current message is deleted
+#
+# Default: true
+next-message-on-delete=true
+
+# The directories where the stylesets are stored. It takes a colon-separated
+# list of directories. If this is unset or if a styleset cannot be found, the
+# following paths will be used as a fallback in that order:
+#
+#   ${XDG_CONFIG_HOME:-~/.config}/aerc/stylesets
+#   ${XDG_DATA_HOME:-~/.local/share}/aerc/stylesets
+#   /usr/local/share/aerc/stylesets
+#   /usr/share/aerc/stylesets
+#
+# default: ""
+stylesets-dirs=
+
+# Uncomment to use box-drawing characters for vertical and horizontal borders.
+#
+# Default: spaces
+# border-char-vertical=│
+# border-char-horizontal=─
+
+# Sets the styleset to use for the aerc ui elements.
+#
+# Default: default
+styleset-name=default
+
+# Activates fuzzy search in commands and their arguments: the typed string is
+#   searched in the command or option in any position, and need not be
+#   consecutive characters in the command or option.
+#fuzzy-complete=false
+
+# How long to wait after the last input before auto-completion is triggered.
+#
+# Default: 250ms
+completion-delay=250ms
+
+#
+# Global switch for completion popovers
+#
+# Default: true
+completion-popovers=true
+
+# Uncomment to use UTF-8 symbols to indicate PGP status of messages
+#
+# Default: ASCII
+#icon-unencrypted=
+#icon-encrypted=✔
+#icon-signed=✔
+#icon-signed-encrypted=✔
+#icon-unknown=✘
+#icon-invalid=⚠
+
+#[ui:account=foo]
+#
+# Enable a threaded view of messages. If this is not supported by the backend
+# (IMAP server or notmuch), threads will be built by the client.
+#
+# Default: false
+#threading-enabled=false
+
+# Force client-side thread building
+#
+# Default: false
+#force-client-threads=false
+
+# Debounce client-side thread building
+#
+# Default: 50ms
+#client-threads-delay=50ms
+
+[statusline]
+# Describes the format string for the statusline.
+#
+# Default: [%a] %S %>%T
+render-format=[%a] %S %>%T
+
+# Specifies the separator between grouped statusline elements.
+#
+# Default: " | "
+# separator=
+
+# Defines the mode for displaying the status elements.
+# Options: text, icon
+#
+# Default: text
+# display-mode=
+
+[viewer]
+#
+# Specifies the pager to use when displaying emails. Note that some filters
+# may add ANSI codes to add color to rendered emails, so you may want to use a
+# pager which supports ANSI codes.
+#
+# Default: less -R
+pager=less -R
+
+#
+# If an email offers several versions (multipart), you can configure which
+# mimetype to prefer. For example, this can be used to prefer plaintext over
+# html emails.
+#
+# Default: text/plain,text/html
+alternatives=text/plain,text/html
+
+#
+# Default setting to determine whether to show full headers or only parsed
+# ones in message viewer.
+#
+# Default: false
+show-headers=false
+
+#
+# Layout of headers when viewing a message. To display multiple headers in the
+# same row, separate them with a pipe, e.g. "From|To". Rows will be hidden if
+# none of their specified headers are present in the message.
+#
+# Default: From|To,Cc|Bcc,Date,Subject
+header-layout=From|To,Cc|Bcc,Date,Subject
+
+# Whether to always show the mimetype of an email, even when it is just a single part
+#
+# Default: false
+always-show-mime=false
+
+# Parses and extracts http links when viewing a message. Links can then be
+# accessed with the open-link command.
+#
+# Default: true
+parse-http-links=true
+
+[compose]
+#
+# Specifies the command to run the editor with. It will be shown in an embedded
+# terminal, though it may also launch a graphical window if the environment
+# supports it. Defaults to $EDITOR, or vi.
+editor=
+
+#
+# Default header fields to display when composing a message. To display
+# multiple headers in the same row, separate them with a pipe, e.g. "To|From".
+#
+# Default: To|From,Subject
+header-layout=To|From,Subject
+
+#
+# Specifies the command to be used to tab-complete email addresses. Any
+# occurrence of "%s" in the address-book-cmd will be replaced with what the
+# user has typed so far.
+#
+# The command must output the completions to standard output, one completion
+# per line. Each line must be tab-delimited, with an email address occurring as
+# the first field. Only the email address field is required. The second field,
+# if present, will be treated as the contact name. Additional fields are
+# ignored.
+#
+# This parameter can also be set per account in accounts.conf.
+address-book-cmd=
+
+#
+# Allow to address yourself when replying
+#
+# Default: true
+reply-to-self=true
+
+[filters]
+#
+# Filters allow you to pipe an email body through a shell command to render
+# certain emails differently, e.g. highlighting them with ANSI escape codes.
+#
+# The first filter which matches the email's mimetype will be used, so order
+# them from most to least specific.
+#
+# You can also match on non-mimetypes, by prefixing with the header to match
+# against (non-case-sensitive) and a comma, e.g. subject,text will match a
+# subject which contains "text". Use header,~regex to match against a regex.
+#subject,~^\[PATCH=colordiff
+text/plain=sed 's/^>\+.*/\x1b[36m&\x1b[0m/'
+#text/html=pandoc -f html -t plain
+text/html=w3m -dump -I UTF-8 -T text/html
+#image/*=catimg -w $(tput cols) -
+
+[triggers]
+#
+# Triggers specify commands to execute when certain events occur.
+#
+# Example:
+# new-email=exec notify-send "New email from %n" "%s"
+
+#
+# Executed when a new email arrives in the selected folder
+new-email=exec notify-send "New email from %a" "%s"
+
+[templates]
+# Templates are used to populate email bodies automatically.
+#
+
+# The directories where the templates are stored. It takes a colon-separated
+# list of directories. If this is unset or if a template cannot be found, the
+# following paths will be used as a fallback in that order:
+#
+#   ${XDG_CONFIG_HOME:-~/.config}/aerc/templates
+#   ${XDG_DATA_HOME:-~/.local/share}/aerc/templates
+#   /usr/local/share/aerc/templates
+#   /usr/share/aerc/templates
+#
+# default: ""
+template-dirs=
+
+# The default template to be used for new messages.
+#
+# default: new_message
+new-message=new_message
+
+# The default template to be used for quoted replies.
+#
+# default: quoted_reply
+quoted-reply=quoted_reply
+
+# The default template to be used for forward as body.
+#
+# default: forward_as_body
+forwards=forward_as_body
diff --git a/dot_config/aerc/binds.conf b/dot_config/aerc/binds.conf
new file mode 100644
index 0000000..cb5ffd3
--- /dev/null
+++ b/dot_config/aerc/binds.conf
@@ -0,0 +1,122 @@
+# Binds are of the form <key sequence> = <command to run>
+# To use '=' in a key sequence, substitute it with "Eq": "<Ctrl+Eq>"
+# If you wish to bind #, you can wrap the key sequence in quotes: "#" = quit
+<C-p> = :prev-tab<Enter>
+<C-n> = :next-tab<Enter>
+<C-t> = :term<Enter>
+? = :help keys<Enter>
+
+[messages]
+q = :quit<Enter>
+
+j = :next<Enter>
+<Down> = :next<Enter>
+<C-d> = :next 50%<Enter>
+<C-f> = :next 100%<Enter>
+<PgDn> = :next 100%<Enter>
+
+k = :prev<Enter>
+<Up> = :prev<Enter>
+<C-u> = :prev 50%<Enter>
+<C-b> = :prev 100%<Enter>
+<PgUp> = :prev 100%<Enter>
+g = :select 0<Enter>
+G = :select -1<Enter>
+
+J = :next-folder<Enter>
+K = :prev-folder<Enter>
+H = :collapse-folder<Enter>
+L = :expand-folder<Enter>
+
+v = :mark -t<Enter>
+V = :mark -v<Enter>
+
+T = :toggle-threads<Enter>
+
+<Enter> = :view<Enter>
+d = :prompt 'Really delete this message?' 'delete-message'<Enter>
+D = :delete<Enter>
+A = :archive flat<Enter>
+
+C = :compose<Enter>
+
+rr = :reply -a<Enter>
+rq = :reply -aq<Enter>
+Rr = :reply<Enter>
+Rq = :reply -q<Enter>
+
+c = :cf<space>
+$ = :term<space>
+! = :term<space>
+| = :pipe<space>
+
+/ = :search<space>
+\ = :filter<space>
+n = :next-result<Enter>
+N = :prev-result<Enter>
+<Esc> = :clear<Enter>
+
+[messages:folder=Drafts]
+<Enter> = :recall<Enter>
+
+[view]
+/ = :toggle-key-passthrough<Enter>/
+q = :close<Enter>
+O = :open<Enter>
+S = :save<space>
+| = :pipe<space>
+D = :delete<Enter>
+A = :archive flat<Enter>
+
+<C-l> = :open-link <space>
+
+f = :forward<Enter>
+rr = :reply -a<Enter>
+rq = :reply -aq<Enter>
+Rr = :reply<Enter>
+Rq = :reply -q<Enter>
+
+H = :toggle-headers<Enter>
+<C-k> = :prev-part<Enter>
+<C-j> = :next-part<Enter>
+J = :next<Enter>
+K = :prev<Enter>
+
+[view::passthrough]
+$noinherit = true
+$ex = <C-x>
+<Esc> = :toggle-key-passthrough<Enter>
+
+[compose]
+# Keybindings used when the embedded terminal is not selected in the compose
+# view
+$ex = <C-x>
+<C-k> = :prev-field<Enter>
+<C-j> = :next-field<Enter>
+<tab> = :next-field<Enter>
+
+[compose::editor]
+# Keybindings used when the embedded terminal is selected in the compose view
+$noinherit = true
+$ex = <C-x>
+<C-k> = :prev-field<Enter>
+<C-j> = :next-field<Enter>
+<C-p> = :prev-tab<Enter>
+<C-n> = :next-tab<Enter>
+
+[compose::review]
+# Keybindings used when reviewing a message to be sent
+y = :send<Enter>
+n = :abort<Enter>
+p = :postpone<Enter>
+q = :choose -o d discard abort -o p postpone postpone<Enter>
+e = :edit<Enter>
+a = :attach<space>
+d = :detach<space>
+
+[terminal]
+$noinherit = true
+$ex = <C-x>
+
+<C-p> = :prev-tab<Enter>
+<C-n> = :next-tab<Enter>